Automatic gear changer- Mechanical Project
The Automatic gear changer system is used to change the gear in a tensionless manner. In this system a fuel power is not required to change the gear. So, that the human energy will not be wasted. The system consists of a battery electronics control board, soft gear mechanism through which the signals are given to the control board which with control the motor which will in turn change the hard gear. Thus the soft hand gear system for two wheelers work.
This type of system can be implemented in vehicles. Here through the soft gear or switching system we can set the gear we want. The gear changing motor which is a stepper motor will rotate according to the gear required. The electronic control board makes all the controls in the system

Advantages:
- Energy is saved
- Low cost
- Easy operation
More Resources /articles
Cutting , Hacksaw Machine Projects
Lathe Machine Projects List , Abstracts
Pneumatic or Air operated projects
Project Sample report , Final report Download
New Mechanical Projects 2020 ( All Projects Post Index List )
Recent Posts
Pressure Vessels - Parts, Design, Application, Types, Material, Diagram
Introduction to Pressure Vessels Vessels, tanks, and pipelines that carry, store, or receive fluids are called pressure vessels. A pressure vessel is defined as a container with a pressure...
Knuckle Joint - Parts, Diagram, Design Calcuation, Applications
Knuckle Joint A knuckle joint is used to connect two rods which are under the action of tensile loads. However, if the joint is guided, the rods may support a compressive load. A knuckle joint...