Electromagnetic Embossing machine project
Abstract Electromagnetic Embossing machine
Conventionally in many manufacturing industries, embossing operation is carried out manually using jigs and fixtures
or by means of a machine. These machines are mechanical, pneumatic or hydraulic. These machines are costlier for manufacturing, installation and for maintenance also. Along with the running cost of these types of machines is also high. An electromagnetic embossing machine proves itself better against these machines in respect with above said points.
This project is about building a working prototype of above said electromagnetic embossing machine. In this machine embossing operation is carried out in project work on very thin aluminum sheet or other soft material. In the machine there’s an electromagnet which incorporates a plunger passing through it.
or by means of a machine. These machines are mechanical, pneumatic or hydraulic. These machines are costlier for manufacturing, installation and for maintenance also. Along with the running cost of these types of machines is also high. An electromagnetic embossing machine proves itself better against these machines in respect with above said points.This project is about building a working prototype of above said electromagnetic embossing machine. In this machine embossing operation is carried out in project work on very thin aluminum sheet or other soft material. In the machine there’s an electromagnet which incorporates a plunger passing through it.
The plunger is allowed for vertical motion through electromagnet. The plunger carries an iron core fixed to its upper end, and to the lower end of the same a tool holder is attached, this tool holder holds an embossing tool that is used for cutting the pipe. The plunger is hanged with the help of springs. A working material is placed just bellow the embossing tool. Entire assembly is fixed into some kind of housing or body.
Whenever electromagnet is made on it pulls the iron core toward it the plunger is forced into downward direction, which pushes the embossing tool against the work (raw) material, thus embossing is carried out, after making the electromagnet dead the spring pulls back the plunger into its original position making it ready for another working stroke, meanwhile the embossed piece of material is retracted.
Whenever electromagnet is made on it pulls the iron core toward it the plunger is forced into downward direction, which pushes the embossing tool against the work (raw) material, thus embossing is carried out, after making the electromagnet dead the spring pulls back the plunger into its original position making it ready for another working stroke, meanwhile the embossed piece of material is retracted.
Main parts of Embossing Machine:
- Electromagnet
- iron Core
- Plunger
- body
- Springs
- Tool Holders
- Embossing Tools
- Die
- Body
More Resources /articles
Sheet Metal Fabrication Projects
Machine Shop Projects List , Abstract
New Mechanical Projects 2020 ( All Projects Post Index List )
Related posts:
ELECTROMAGNETIC SHEARING MACHINE MECHANICAL PROJECT 
Electromagnetic project For Mechanical Engineering Students 
AUTOMATIC EMBOSSING DRILLING MACHINE Mechanical Project 
DESIGN AND FABRICATION OF ELECTROMAGNETIC ENGINE Drilling machine project For Mechanical Engineering Students 
Manual Die Cutting Machine – Leather Cutting Machine | Mechanical Project 
Hand Operated bench Shearing Machine | Mechanical Project 
The Jig Saw Machine Report Download- Mechanical ProjectRecent Posts
Pressure Vessels - Parts, Design, Application, Types, Material, Diagram
Introduction to Pressure Vessels Vessels, tanks, and pipelines that carry, store, or receive fluids are called pressure vessels. A pressure vessel is defined as a container with a pressure...
Knuckle Joint - Parts, Diagram, Design Calcuation, Applications
Knuckle Joint A knuckle joint is used to connect two rods which are under the action of tensile loads. However, if the joint is guided, the rods may support a compressive load. A knuckle joint...