DESIGN AND FABRICATION OF MODIFIED GRAIN BUCKET
In material handling, the cranes play a vital role in modern manufacturing industries, total load is acted at the bucket which transmits the load. In our project we aim to modify the design of the bucket for carrying the load as well as transferring it from one place to another. This can be achieved with the help of “MODIFIED CRANE BUCKET SYSTEM”. Here the gripper is split into two equal halves which are connected with the help of two handling blocks in which one is for handling the position of the gripper and next one is for loading and unloading the component with the help of controlling the pair of grippers. The activation of the gripper is controlled with the help of hand lever which is powered manually with the help of pulley and rope arrangement.
The material from one place goes to the other place with the help of crane bucket through the activation of the hand lever. This system reduces the worker’s fatigue and increases the overall efficiency of production processes with good safety. It is fabricated with complete clear front, small compact frame, good reach, high lift and with low center of gravity. This MODIFIED CRANE BUCKET SYSTEM has the capacity of lifting 5 kg with wide spread application in the shop floor. Thus the floor crane would serve as a safe, versatile and cost efficient system for material handling operations.
Which is contain for two D.C motor, have it placed fixing the two pulley one is drive to have a closed the bucket and another one is lifting to the total bucket weight, every think is drive to the rope connection.
That is hole setup is contain for moving frame and placed at base frame had been suitable process for sand collecting and light weight material transferred conditions usage.
It is operated to the two push button, which connect the battery to motor, you are drive to motor, press the push button it will be operated for lifting and closing condition.
Introduction to Pressure Vessels Vessels, tanks, and pipelines that carry, store, or receive fluids are called pressure vessels. A pressure vessel is defined as a container with a pressure...
Knuckle Joint A knuckle joint is used to connect two rods which are under the action of tensile loads. However, if the joint is guided, the rods may support a compressive load. A knuckle joint...