What tools used For Plumbing – Plumbing Tools
Introduction to Plumbing :
Plumbing also refers to a system of pipes and fixtures installed in a building for the distribution of potable water and the removal of waste water. Plumbing is the skilled trade of working with pipes, tubing and plumbing fixtures for drinking water systems and the drainage of waste. A plumber is someone who installs or repairs piping systems, plumbing fixtures and equipment such as water heaters. The plumbing industry is a basic and substantial part of every developed economy due to the need for clean water, and proper collection and transport of wastes. In addition to the straight pipe or tubing, many fittings are required in plumbing systems, such as valves, elbows, tees, and unions.
1. Pipe wrench
2. Pipe vice
3. Pipe cutter
4. Die set
5. Hack saw
1. Pipe wrench:
The pipe wrench is an adjustable wrench used for turning soft iron pipes and fittings with a rounded surface. The design of the adjustable jaw allows it to rock in the frame, such that any forward pressure on the handle tends to pull the jaws tighter together. Teeth angled in the direction of turn dig into the soft pipe.
2. Pipe vice:
The pipe vice is used to hold the pipes rigidly in position during thread cutting and fitting of bends, valves, couplings etc. it consists of fixed jaw and movable jaw to hold the work piece and a screw rod with handle is used for an adjustment. This vice is fixed on the work bench.
3. Pipe cutter:
A pipe cutter is a type of tool used by plumbers to cut pipe. Besides producing a clean cut, the tool is often a faster and more convenient way of cutting pipe than using a hacksaw, although this depends on the metal the pipe is made out of. There are two types of pipe cutters. Plastic tubing cutters, which really look much like a pair of pruning shears, may be used for thinner pipes and tubes such as a Sprinkler pipe. Then there is a pipe cutter with a sharp wheel and adjustable jaw grips for use on thicker pipes. These are used by rotating it around the pipe and repeatedly tightening it until it.
4. Die set:
A die head is a threading die that is used in the high volume production of threaded components. They may be used for either cutting a thread or rolling a thread. They may also be used for internal or external thread cutting.
5. Hack saw:
A hacksaw is a fine-tooth saw with a blade under tension in a frame, used for cutting materials such as metal. Hand-held hacksaws consist of a metal arch with a handle, usually a pistol grip, with pins for attaching a narrow disposable blade. A screw or other mechanism is used to put the thin blade under tension. The blade can mounted with the teeth facing toward or away from the handle, resulting in cutting action on either the push or pull stroke.
Introduction to Pressure Vessels Vessels, tanks, and pipelines that carry, store, or receive fluids are called pressure vessels. A pressure vessel is defined as a container with a pressure...
Knuckle Joint A knuckle joint is used to connect two rods which are under the action of tensile loads. However, if the joint is guided, the rods may support a compressive load. A knuckle joint...