Design and fabrication of Air Operated Mini Car ( New Mechanical Projects 2017 )
- Coal, petroleum, natural gas, water and nuclear energy are the five main energy sources that have played important roles and have been widely used by human. At present, the energy consumed all over the world almost completely relies on the supply of the five main energy sources. The consumption of petroleum constitutes approximately 60 percent of energy used from all sources, so it is the major consumer of energy.
- Everyday radios, newspapers, televisions and the internet warn us of energy exhaustion,atmospheric pollution and hostile climatic conditions. After few hundred years of industrial development, we are facing these global problems while at the same time we maintain a high standard of living.
What is a Air Car ? How it works ?
3D Model Of air operated mini car build in Catia.
Prototype model of compressed air car , pneumatic vehicle , fabricated model of compressed air car , working of air car , compressed air vehicle .
It requires lighter metal only since it does not have to withstand elevated temperatures. As there is no combustion taking place, there is no need for mixing fuel and air. Here compressed air is made use to direct in to the piston cylinder arrangement. It simply expands air inside the cylinder and does useful work on the piston. This work done on the piston provides sufficient power to the drive the vehicle.
- The flows from the piston chambers and rod chambers of the cylinders are led through the tubing system and a remote valve manifold. In the damper manifold the oil flows create a pressure loss over the solenoid valves and other appendages in the tubing system. The valves are laced parallel for each flow and therefore the total flow‐through area changes when one of the valves opens or shuts.
ADVANTAGES OF AIR OPERATED MINI CAR :
Buy This Project/other or Check Inquiry
Name : Mr. HITESH ,
Phone/Whatsapp : 07276808426
Email ID: firstname.lastname@example.org
Introduction to Seals : Oil under pressure is moving in every hydraulic circuit. Since oil is a liquid it has the tendency to 'leak' through every gas/slot it finds during movement. This leakage of...
Introduction to Slotting Machine : The slotter or slotting machine is also a reciprocating type of machine tool similar to a shaper. It may be considered as a vertical shaper. The machine operates...