Button Operated Electro-magnetic Gear Shifting System For Two Wheeler
SYNOPSIS
When a gear shifting-up of an automatic transmission is to be effected, the load applied by the load device is increased, or the load is connected to an output rotation shaft of the engine via a selectively-connecting device, thereby reducing the rotational speed of the output rotation shaft of the engine to a required level. In our project, two electro magnetic coils are coupled to the gear rod of the two ends. The two buttons are used to activate the electro-magnetic coil so that the gear will be shifted.
Check Similar project: Design and Fabrication Of Tension less Bike Full Report Download
INTRODUCTION

It requires simple maintenance cares
ADVANTAGES
- The safety system for automobile.
- Checking and cleaning are easy, because of the main parts are screwed.
- Easy to Handle.
- Low cost automation Project
- Repairing is easy.
- Replacement of parts is easy.
DISADVANTAGES
- Initial cost is high.
- The system is complicated one.
APPLICATIONS
- It is very much useful for Car Owners and Auto-garages.
- Thus it can be useful for the two wheeler application
2 thoughts on “Button Operated Electro-magnetic Gear Shifting System For Two Wheeler”
Leave a Reply
Recent Posts
Pressure Vessels - Parts, Design, Application, Types, Material, Diagram
Introduction to Pressure Vessels Vessels, tanks, and pipelines that carry, store, or receive fluids are called pressure vessels. A pressure vessel is defined as a container with a pressure...
Knuckle Joint - Parts, Diagram, Design Calcuation, Applications
Knuckle Joint A knuckle joint is used to connect two rods which are under the action of tensile loads. However, if the joint is guided, the rods may support a compressive load. A knuckle joint...
i want full report pdf