Quick Lifting Jack Project report Download – Mechanical Projects
This project work titled “FABRICATION OF QUICK LIFTING JACK WITH GEAR ARRANGEMENT” has been conceived having studied the difficulty in lifting the any type of light vehicles. Our survey in the regard in several automobile garages, revealed the facts that mostly some difficult methods were adopted in lifting the vehicles for reconditioning. Now the project has mainly concentrated on this difficulty, and hence a suitable device has been designed. Such that the vehicle can be lifted from the floor land without application of any impact force. The fabrication part of it has been considered with almost case for its simplicity and economy, such that this can be accommodated as one of the essential tools on automobile garages.
Read More :
- Bevel gear operated Screw Jack for Lifting Operation
- FABRICATION OF QUICK LIFTING JACK WITH GEAR ARRANGEMENT
This device the quick lifting jack with gear arrangement for automobile garages has been developed to later the needs of small and medium automobile garages, who are normally man powered with very minimum of skilled labors. In most of the garages the vehicles are lifted by using screw jack. This needs high man power and skilled labors. In order to avoid all such disadvantages. This, motorized hydraulic jack has been designed in such a way that it can be used to lift the vehicle very smoothly without any impact force. The operation is made be simple that even an unskilled labor can handled, by just demonstrating the working of the motorized hydraulic jack once.
- BEVEL GEARS
- LIFTING ROD
The quick lift jack is a device used for lifting heavy loads by the application of much smaller force. The working principle of a quick lift jack may be explained with the help of Fig. Consider a two bevel gears arrangement.
Quick lift jacks and much other technological advancement such as automobile brakes and dental chairs work. Handle is used to rotates the bevel gear arrangements. Jack arrangement i.e. lifting rod will be fixed to bevel gear. Clockwise rotation of handle, jack will rotates upward motion and anti clockwise rotation of handle, jack will rotates downward motion.
• Quick lift of vehicles.
• Low man power using.
• Low cost automation.
• Maintenance cost is very low.
• Easy to install
• Less in weight
• Implementation in automobiles.
• Lifting four wheeler vehicles.
• Implementing in industries for lifting machines
Introduction to Pressure Vessels Vessels, tanks, and pipelines that carry, store, or receive fluids are called pressure vessels. A pressure vessel is defined as a container with a pressure...
Knuckle Joint A knuckle joint is used to connect two rods which are under the action of tensile loads. However, if the joint is guided, the rods may support a compressive load. A knuckle joint...