What is Tidal Energy Plant- How it work, Advantages and disadvantages of tidal energy plant
Principle of Tidal power generation:
Tide or wave is periodic rise and fall of water level of the sea. Tides occur due to the attraction of sea water by the moon. Tides contain large amount of potential energy which is used for power generation. When the water is above the mean sea level, it is called flood tide. When water level is below the mean level it is called ebb tide. Tidal power plants are renewable energy sources.
Working of Tidal power generation:
The arrangement of this system is shown in image. The ocean tides rise and fall and water can be stored during the rise period and it can be discharged during fall. A dam is constructed separating the tidal basin from the sea and a difference in water level is obtained between the basin and sea.
During high tide period, water flows from the sea into the tidal basin through the water turbine. The height of tide is above the tidal basin. Hence the turbine unit operates and generates power, as it is directly coupled to a generator.
The generation of power stops only when sea level and the tidal basin level are equal. For the generation of power economically using this source of energy requires some minimum tide height and suitable site. Kislaya power plants in France are the only examples of this type of power plant.During low tide period, water flows from tidal basin to sea, as the water level in the basin is more than that of the tide in the sea. During this period also, the flowing water rotates the turbine and generates power.
Advantages of tidal power plants
- It is free from pollution as it does not use any fuel.
- It is superior to hydro-power plant as it is totally independent of rain.
- It improves the possibility of fish farming in the tidal basins and it can provide recreational facilities to visitors and holiday makers.
Disadvantages of tidal power plants:
- Tidal power plants can be developed only if natural sites are available on the bay.
- As the sites are available on the bays which are always far away from load centers, the power generated has to be transmitted to long distances. This increases the transmission cost and transmission losses.
- The supply of power is not continuous as it depends upon the timing of tides.
- The navigation is obstructed.
- Utilization of tidal energy on small scale is not economical.
Pressure Vessels - Parts, Design, Application, Types, Material, Diagram
Introduction to Pressure Vessels Vessels, tanks, and pipelines that carry, store, or receive fluids are called pressure vessels. A pressure vessel is defined as a container with a pressure...
Knuckle Joint - Parts, Diagram, Design Calcuation, Applications
Knuckle Joint A knuckle joint is used to connect two rods which are under the action of tensile loads. However, if the joint is guided, the rods may support a compressive load. A knuckle joint...